Product Family

ASA 23xy

ASA 2310 (your choice)

Package: DFN12
Interface: Analog PWM SENT
Temp. Range: -40°C - 170°C
Switching Points [mT] at 25°C: Bon 11.00 - Boff 98.00
Ordering Code: ASA2310DF
Switching Behavior: Bipolar Differential
Temperature Coefficient [ppm/K]: 1.345
Magn. Range [mT]: - 100 - + 200

Flexible TMR Analog Front-End IC for High-Speed Angle Sensing Applications

Short Description

ASA 2310 is a high-performance TMR analog front-end IC for high-speed angle sensing applications with rotation speeds of up to 650,000 rpm.

The ASA 2310 is designed to interface the high-precision analog TMR sensors of the TAS family. The sensor interface provides two differential inputs for sine and cosine TMR resistive bridges, respectively. The integrated sine and cosine channels of ASA 2310 have their own programmable gain amplifier (PGA), which are used as a low-noise instrumentation amplifier for the TMR sensor signals. Several coarse gain settings ensure that the device can support various TMR full- and half-bridges from TDK. The output buffer amplifies the signal even further and acts as buffer for the external load.

The ASA 2310 offers an intrinsic signal conditioning with on-chip calibration, which reduces effort on ECU side. The device can compensate for the main sensor and magnetic system non-idealities, like offset error, amplitude mismatch and orthogonality error. In addition, it is possible to define the angular reference position (0-angle) for the sine and cosine output signals. This allows the compensation of mechanical twist between magnet and sensor at module level. The conditioned signals can be output as differential or single-ended analog sine and cosine output signals. These signals allow the user to calculate the angle with very high accuracy by an external A/D-converter and a microcontroller/ECU.

The ASA 2310 is programmable by modulation of the output voltage. No additional programming pin is needed and fast end-of-line programming is enabled.

This product is defined as SEooC (Safety Element out of Context) ASIL B ready according to ISO 26262:2018 (Metrics (PMHF, SPFM, LFM) according to ASIL C). ASA 2310 contains integrated safety monitorings, such as overvoltage and undervoltage detection as well as wire-break monitoring during normal operation

The signal-conditioning IC is available in a very compact 3 x 3 mm DFN12 SMD package.

Block diagram – system architecture

Downloads

Main features

  • Support of various TMR full- and half-bridges from TDK
  • Optimized signal conditioning for TMR signals, like output gain, offset, 0-angle and orthogonality correction
  • Easy-to-use differential or single-ended SIN/COS outputs for remote sensing applications with best-in-class EMC performance
  • Fast response time of max. 3 µs and high output bandwidth for applications up to 650,000 rpm
  • Various analog output configurations
  • Differential or single-ended SIN/COS analog output signals
  • Non-ratiometric or ratiometric analog outputs related to the supply voltage
  • SEooC ASIL B ready according to ISO 26262:2018 to support Functional Safety applications (Metrics (PMHF, SPFM, LFM) according to ASIL C)
  • Intrinsic signal conditioning with on-chip calibration and integrated safety monitoring reduce effort on ECU side
  • Flux-less self-test: Triggered or at IC start-up for testing of the signalpath during production or in application
  • Operates from 3.0 V up to 5.5 V supply voltage
  • Low current consumption of typ. 5.5 mA
  • Operates from –40 °C up to 170 °C junction temperature (Max. Ambient Temperature: TA,absmax = 160 °C)
  • Programming via the IC’s output pin. No additional programming pin required
  • Under- and overvoltage detection of VSUP
  • Passive wire-break detection working with external pull-up or pull-down resistor
  • On-chip temperature sensor for overtemperature supervision
  • Integrated, protected supply for the external TMR bridges
  • Various integrated supervision features of the external TMR bridges
  • Small 3 × 3 mm2 DFN12 SMD package
  • AEC-Q100 qualification

All products of this family

ASA 2310

Package: DFN12
Ordering Code: ASA2310DF
Interface: Analog, PWM, SENT
Switching Behavior: Bipolar, Differential
Temp. Range: -40°C - 170°C
Temperature Coefficient [ppm/K]: 1.345
Switching Points [mT] at 25°C: Bon11 - Boff98
Magn. Range [mT]: -100 – +200
Contact Sales

Buy the follwing article from Digi-Key Electronics:

 

You'll now leave the page micronas.tdk.com and enter the webshop of our sales partner Digi-Key Electronics.

Go to shop Back to micronas.tdk.com